So you are ready to dip your toes into the scuba diving waters.

That’s great.

And I bet, you can’t wait to get your very own scuba diving tank.

After all, you have everything else that makes for scuba diving gear.

As is the case when buying something new, there are always so many questions that are begging to be answered.

For example, “What capacity tank do I need?” or “What brand should I invest in?”

I get you.

The choice of scuba tanks goes as dead as the oceans you want to explore, and as varied as the sea life itself.

That’s why today is your lucky day as we are looking at one of the best – if not the best scuba tanks you can invest in – the Luxfer Compact Brushed Aluminum CF Tank 3300psi (Neutrally Buoyant) with Pro Valve.

But before we get into our review, let’s clear a few things out of the air first.

Luxfer Compact Brushed Aluminum 80 Tank

Customer Review Rating

How to Buy a Scuba Tank – 4 Factors to Consider

So how exactly do you go about buying that coveted scuba tank?

This is not as easy as buying a pair of socks so you have to pay extra attention to your needs and what each tank you look at has to offer.

This is why you are safer going with the Luxfer Compact Brushed Aluminum CF Tank 3300psi (Neutrally Buoyant) with pro valve.

It is as close to perfect as they come.

But how exactly do you go about buying a scuba tank?

Well, to buy the right scuba tank, you need to ask the right questions.

Let’s get to it, shall we?

Steel Tank or Aluminum Tank?

When shopping around for a scuba tank, you’ll definitely come to a crossroad we all have spent a bit of time on – steel scuba tank vs aluminum scuba tank.

This is not such an easy choice to make as both have their merits – and demerits.

A look at their pros and cons will help you get on the right track.

  • Steel’s greatest advantage is their weight. Because steel tanks are heavier than their aluminum counterparts, you will require fewer weights when diving. Their weight also means they shift from negative buoyancy to positive buoyancy as you consume the air. This means that even at the end of the dive, you’ll still be properly weighted.
  • When it comes to rust resistance, aluminum takes the cup. This is mainly because steel is easily affected by rust, while aluminum is more resistant. In fact, with steel, all it takes is a bit of fresh water left unattended inside the tank and the corrosion kicks in. That, right there, is a good reason to strongly consider getting the Luxfer Compact Brushed Aluminum CF Tank 3300psi (Neutrally Buoyant) with pro valve.
  • As for sturdiness, the prize goes to steel scuba tanks. Aluminum is a softer metal when compared to steel, making it more susceptible to dents and damage when they hit against something.
  • For most people, one of the biggest factors that determine whether to buy a product or not is the price. This is another win for aluminum tanks – they are cheaper than their steel counterparts.

Low-Pressure vs High-Pressure Scuba Tanks

Another consideration to take into account when looking for a scuba tank is whether you need a high-pressure or low-pressure tank.

The pressure in dive tanks mostly ranges between 2400 PSI-3500PSI (or 165-240 Bar). PSI is the measurement of pressure and stands for pounds per square inch.

High-pressure tanks are those that range between 3300 PSI – 3500 PSI. They are much smaller than low-pressure tanks and contain high amounts of air. High-pressure tanks also need a regulator set up for DIN, regular part replacement, and frequent servicing since they are subjected to extremely high amounts of pressure.

Low-pressure tanks, on the other hand, are those whose pressure ranges between 2400 PSI and 2700 PSI. They are easier to handle and don’t require as much servicing as high-pressure tanks do.

Understand Your Valve Fittings

When it comes to connecting your tank to the regulator, there are 2 types of valve fittings used to do so – Yoke and DIN.

Remember, valves are an important component in your scuba tank set up since they control the amount of air that flows from your tank to the regulator.

So what are the types of valve fitting?

  • Yoke valves. These are the most common, easiest to use valve fittings and are mostly used in the aluminum 80 scuba tanks.
  • DIN valves. DIN valves have the advantage of being safer than Yoke valves and are best suited to work with high-pressure tanks.

Speaking of valves, you should make it a habit to occasionally check if the valve on your tank is loose or too hard to turn. If your valve is too loose or too hard to turn, you will need to take your tank for servicing.

Another good habit is to regularly check for leaks in your valve. This is simple to do.

All it takes is submerging your tank in water and look for bubbles. If you see some bubbles, it means your tank is leaking and need to be serviced.

Used or Brand New?

Sometimes, buying a used diving tank is a good idea as it can save you a bit of cash.

That being said, it can be a minefield as you don’t really know what you are getting – especially when buying online.

Extra caution should be taken when buying a used scuba tank.

If, however, you decide to go the used tank route, here are a few pointers to help you avoid buying a lemon.

  • Be sure to get the history of the tank. This includes how it was used and stored. This will help you know what the tank was put through and a clearer picture of the state it’s currently in.
  • If possible, give the tank a thorough look over. Check for signs of external damage, dents, rust, deep scratches, and anything else that might compromise the quality of the tank.
  • Test for internal damage. This may not be as easy as checking for external damage but one simple way to check if the tank is internally sound is by checking to see if it has air. If it does, it probably means it’s fine.
  • Be sure to check for the last service date.
  • Make sure the valve on the tank is compatible with your first stage regulator attachment.

These are but a few of the things you should look out for when buying a used tank.

But if you want your first (or upgrade tank) to be special, then brand new is the way to go – especially since one like the Luxfer Compact Brushed Aluminum CF Tank 3300psi (Neutrally Buoyant) with Pro Valve is so affordable.

Why this scuba tank in particular?

Well, let’s get on with our Luxfer Compact Brushed Aluminum CF Tank 3300psi (Neutrally Buoyant) with the Pro Valve, shall we?

The Luxfer Compact Brushed Aluminum CF Tank 3300psi (Neutrally Buoyant) with Pro Valve Reviewed

If you are a beginner or simply a bit on the smaller side, then the Luxfer Compact Brushed tank is definitely your best bet when it comes to choosing a scuba tank.

Let’s take a look at the specifications so that you can see why you need to invest in this marvelous tank.

The Luxfer Compact Brushed Aluminum CF Tank Specifications

  • Comes with Pro-Valve (Yoke/Din), Nitrox Tank Wrap, and VIP Inspection Sticker and Fresh Hydro
  • Max fill pressure: 3300 PSI / 228 Bar; Capacity: 80 Cubic Feet / 11.1 Liters
  • Length: 25.5 inches / 648 millimeters; Diameter: 7.25inches / 184.2 millimeters
  • Weight (empty): 34.7 pounds / 15.7 kilograms
  • Buoyancy: Full: -5.8 pounds / -2.63 kilograms; Empty 0.0 pounds / 0.0 kilograms

Sopras Sub Pro-Valve for Scuba Tanks DIN or Yoke

If you are one to know a thing or two about tanks, you have probably noticed that the Luxfer is approximately 3-inches shorter than many of other cylinders that carrying the same capacity of air.

And at 34.7 pounds, it is also lighter than most tanks in its category too.

This is certainly an amazing scuba tank as it is compact, lightweight, and yet, able to carry as much air as tanks bigger than it.

Size, however, is not the only trick up this scuba tank’s sleeve.

One of the features that sets it apart from other scuba tanks is its construction. The Luxfer Compact Brushed Aluminum CF 3300 PSI tank is made from high-strength aluminum alloy 6061-T6. This is a very strong aluminum alloy that makes it sturdier than other aluminum tanks.

This is definitely a big plus as aluminum tanks have a reputation for not being very strong. But with the Luxfer Compact Brushed Aluminum CF 3300 PSI tank, that reputation is about to change – for the better.

As said, this tank is not a one trick pony – it has many advantages that make it better than its counterparts. And one of those advantages is the Pro Valve. This is a special type of valve that works with both DIN and Yoke attachments. This eliminates the hassle of changing from one set of fittings to another as whatever fittings you have will be compatible.

One other feature worth noting about the Luxfer Compact Brushed Aluminum CF 3300 PSI tank is that it is neutrally buoyant. This means, underwater, it won’t drag you down or pull you up. Whatever level of submersion you are comfortable with, you will remain there without any effort on your part.

When it comes to safety standards, you can rest assured that the Luxfer Compact Brushed Aluminum CF 3300 PSI tank has been thoroughly tested to ensure your safety. And it comes with a VIP inspection sticker to prove it.

I know your ears are itching to find out how much such an amazing scuba tank will cost you and I won’t keep you waiting.

All you need to take this baby home is $270.00.

I told you aluminum tanks are affordable.

But for a tank with all the advantages this one has, this is not a bargain – it’s a steal – in your favor of course.

The Luxfer Compact Brushed Aluminum CF Tank 3300 PSI with Pro Valve – Built like a Tank

If you are searching for a compact, durable, and reliable scuba tank that won’t break the bank, the Luxfer Compact Brushed Aluminum CF 3300 PSI tank is definitely it.

This is one scuba tank that is really built like a tank.

It may not be indestructible, but it definitely is tough enough to take you wherever you may want to go on your underwater journeys.

Not only is it sturdy and durable, but the reliability, convenience, and portability it offers are certainly worth every penny you will pay for this super scuba tank.

There’s no need for you to look around for anything else as this is the best on the market.

Pin It on Pinterest

Share This